![]() Outgoing traffic (mobile initiated) from the private network to the public mobile network assumes the IP address of the public mobile interface. NAT allows the Digi Connect WAN to have a single public IP address on the mobile link, while allowing multiple private IP addressed devices connected to the Ethernet interface. This document describes each function, how they are used in conjunction with each other, how they are used, and what issues can occur with each if not used properly. Generic Routing Encapsulation (GRE) forwarding Confirm the changes by clicking on «Adopt changes».The Digi Connect WAN supports four features which provide security and IP traffic forwarding when using incoming or Mobile Terminated connections:Ģ. Set the 2.4 GHz or 5 GHz frequency network to «deactivate». On the left, click on Advanced settings -> Wireless -> Wireless signal. You will find the password on the bottom of your modem under Settings password». In the Connect App you can find detailed installation instructions and you are competently guided through optimization of your WiFi.ĭo you want to deactivate a frequency band?Įnter 192.168.0.1 in your computer’s Internet browser. It’s easiest to switch the frequency range with the free Connect App. The modem selects the better frequency automatically. Generally speaking, however, the 5 GHz network is used less and therefore offers a better connectionīoth frequency bands – 2.4 and 5 GHz – are activated at the same time on the Connect Box. In short, the 2.4 GHz network radiates further but is therefore slower, while the 5 GHz network is faster but does not reach so far. WLAN waves can be transmitted via the two frequency bands 2.4 GHz (GHz = gigahertz) and 5 GHz. A frequency band refers to a particular frequency range within which signals can be sent. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |